Rhythm QR Clamps

Crupi’s first new product under the Rhythm line, a 31.8mm (or 1-1/4") quick release clamp.  Superior clamping power that allows you to adjust your seat height with the pull of a lever (no tools needed).  Most Pro riders today will adjust their seat height all the way up after each moto in order to properly "cool down" in preparation for their next race.  With the seat higher, it makes cooling down easier as you can get full leg extension while sitting and pedaling.  Made from 6061 T6 Aluminum, this clamp has it all!   

Headset spacers are more important than most people think.  They serve a couple of functions that can be very helpful.  First of all, instead of cutting your fork to fit your frame, use spacers to take up the extra space so you don’t have to cut your fork.  This way, you can use your fork on another frame when you need to.  In most cases, this can save you the cost of a new fork.  Second, use spacers to give a little added height adjustment in your bars if you need it.  Always be careful to insure that the top tube of your fork comes all the way through your stem and up to the top of the stem hole.  Using spacers on a fork that is too short can cause your stem to weaken. 

Rhythm Alloy Chain Ring Bolts

For a light weight, great fit each time, put some Rhythm into your gearing!  Made from 6061 T6 Aluminum, these bolts feature a 4mm Allen key size so the wrench fits all the way through allowing more contact area for the Allen key and leaving more material making them stronger than conventional bolt sets!       

Now you can buy any 1-1/8" stem you want and make it fit your 1" fork by adding this little gem.  This shim just slides into the fork hole of the stem, then slides over a 1" fork tube perfectly.  Strong as a stem designed for a 1" fork.  When it is time to move up to the next size fork, just remove the shim and you are good to go! 

Rhythm Rim Tape

Nylon rim tape to protect your tubes from the inner part of the rim.  Every wheel must have rim strips or rim tape.  Tape is a much more secure way of keeping your tubes safe.  1 roll covers enough for 1 wheel.